Miller introduced its new vary of CiNX tripod heads simply earlier than IBC 2019. CiNX fluid heads can be found in three variations, CiNX three, CiNX 5 and CiNX 7.
I used to be within the CiNX 5 as a result of I believe it's versatile sufficient for use with medium-sized digital cinema cameras, even going so far as a big digital cinema digicam and digital cameras. Targets. Miller gracefully lent me a CiNX 5 Head head equipment system and a set of HDC 100 All Stage tripod legs with a central spreader.
Who’s the CiNX 5 for?
In accordance with Miller, the CiNX 5 fluid head has been designed for filmmakers searching for a flexible, light-weight and sturdy answer at a comparatively inexpensive worth. The extensive payload vary of Miller's new CiNX fluid heads makes it potential to counterbalance a number of digicam sizes, lenses and equipment.
In my view, the CiNX 5 is aimed on the similar consumer who would take a look at a Sachtler 18 S2 fluid head, Sachtler 1910 Cine 7 + 7 HD fluid head, OConnor Final 1030Ds fluid head, OConnor Final 1040 fluid head, Vinten VISION 100 Fluid Head or Cartoni Focus 22 Fluid Head.
Miller CiNX5 on the left, Sachtler 18P S2 on the appropriate
CiNX 5 Principal options
Clean beginning fluid drag system, easy cease expertise and balanced diagonal transitions.16 counterweight positions. Payload vary from 2 kg to Four kg to 21 kg. Place to slip to 7 + zero positions. Security lock-loading digicam platform, appropriate for Arri / OConnor or appropriate digicam plates. Sliding vary for 50mm digicam plate. A number of mounting bases: CiNX is adaptable to a Mitchel base plate, 100 or 150 mm ball leveling (delivered with 100 mm ball leveling) .Four Illuminated spirit degree and pan-tilt controls. Floating floating caliper locks assure no-bounce efficiency. A detachable ball degree stud permits mounting on a flat base with a three/eight "screw thread. three years guarantee.
The CiNX 5 is unquestionably a severe head. Though weighing about the identical weight as a Sachtler 18 S2 and having the same payload capability, it appears one way or the other greater, greater and stronger.
Miller CiNX 5Connor Final 1040 Sachtler 1910 Cine 7 + 7 HD
By way of look, I believe the CiNX 5 seems to be like a cross between an OConnor Final 1040 fluid head and a Sachtler 1910 Cine 7 + 7 HD fluid head.
The CiNX 5 has a payload capability of two kg (21 kg) as much as 21 kg (46.2 lb). This can be a good vary that can cowl most digicam circumstances and lenses.
With this payload capability, the CINX 5 may very well be used with a 6K BMPCC sooner or later and a ARRI ALEXA Mini the subsequent day. If you’re going to spend some huge cash on a tripod, you need it to be as versatile as potential.
How does this payload capability evaluate to different comparable fluid heads available on the market?
Miller CiNX 52 kg (Four.Four lb) as much as 21 kg (46.2 lb) Sachtler fluid head 18 S22 kg (Four.Four lb) to 20 kg (44.1 lb) Sachtler fluid head 1910 Cine 7 + 7 HD9.1 kg (2o lb) to 22 kg (48 lb) Vinten VISION 100 fluid head (100 mm ball base) 6.98 kg (15.Four lb) to 20 kg (44.1 lb) OConnor Final 10400 to 20.41 kg (zero to 45 lb) Fluid Head OConnor Final 1030Ds Fluid Head Equipment 24 kg (53 lb) No minimal load is listed Cartoni Focus 22 Fluid Carton three kg ( 6.6 lbs) to 22 kg (48.5 lbs)
No person likes to put on one thing heavy and, in my expertise, selecting a tripod requires a little bit of mutual concessions. In the event you select a product that’s too mild, it may be straightforward to hold, nevertheless it won’t give secure outcomes if you use lengthy lenses and you’ll in all probability have issue for those who attempt to pan and tilt sweetness.
In the event you select one thing too heavy, you should have an especially secure platform in all situations and it is possible for you to to make very easy and exact panoramas and tilts. The opposite facet of the coin is that it will likely be heavy to hold.
The CiNX 5 fluid head weighs Four.zero kg. How does this evaluate to different fluid heads with comparable payload capability?
Miller CiNX Sachtler 18 S2 Four-liter Sachtler Fluid Head 18 S2 Sachtler 1910 Cine 7 + 7 HD Fluid Head3,three kg (7.three lb.) Vinten VISION 100 Fluid Head (100 mm Ball Base) three.2 kg (7 lb.) OConnor Final 10404.eight kg (10.6 lb) fluid head consists of
launch, plate and lashing system, however excluding the Baroconnor Final Fluid Head Equipment 1030Ds3.9 kg (eight.7 lb.) Cartoni Head 22 fluid head3.9 kg (eight.7 lb.)
As you possibly can see, fluid tripod heads of this dimension and payload capability often weigh about the identical quantity.
In fact, you cannot simply use a full flowing head, you’ll have to affiliate it with a stick set for many purposes. Relying on the sticks you select, the influence on the load of your tripod will even be appreciable.
In actuality, the CiNX 5 won’t be a head chosen by somebody who makes use of a digital digicam with out a mirror or a small digital digicam. This can be a severe head that can enchantment to customers of enormous format digital cameras similar to ARRI, the Panasonic Varicam collection, the Canon C700, the Blackmagic URSA Mini Professional Four.6K G2 and all those that use huge and massive lenses.
On which tripods will it work?
The CiNX 5 fluid head will work with Miller tripods, together with 100mm Solo, 100mm Sprinter, HD and HDC.
They will even work with most simple 100mm, 150mm and Mitchell tripods.
I've tried the pinnacle on a spread of 100mm Sachtler tripod toes and it has labored as properly. I personally discovered that the CiNX5 and the Sachtler Flowtech 100 have been a pleasant mixture.
Sachtler ball leveler on the left, Miller on the appropriate
The warning that I discovered when utilizing the CiNX5 head on the toes of my Sachtler Flowtech 100 tripod was that I had to make use of a Sachtler ball leveler, the Miller leveler being too huge. I couldn’t use my Sachtler SpeedLevel forceps as a result of it was not appropriate with the Miller head.
How do you select the appropriate tripod?
There actually just isn’t an ideal tripod. Everybody's wants are completely different and plenty of components decide which tripod is finest for you.
What you might want to do when deciding on a tripod will depend on the kind of work you might be doing, the cameras and lenses you might be utilizing and the tools it is possible for you to to make use of sooner or later. A tripod is a long-term funding that can final you many a long time for those who cope with it. It’ll survive any digicam you at present personal. A tripod that might fit your present wants might now not be sooner or later.
In case you are an expert who works, your tripod shall be one of many elementary elements of your equipment. I by no means perceive why folks purchase an costly digital cinema digicam after which put it on an inexpensive tripod.
Personally, I don’t like tremendous light-weight tripods. Though they are often simply transported, the pinnacle of those tripods is often very dangerous and you cannot make a pleasant pan or tilt managed by fluid. Every time I exploit a tripod like this one, particularly with smaller mirrorless cameras, I find yourself being pissed off by the fineness of panning and tilting.
Pay attention, I perceive, generally you want a light-weight tripod. In case you are solely taking pictures locked or for those who want a tripod for a second digicam for an interview, then a light-weight tripod is smart. It additionally makes numerous sense in case you are touring or have to hold a tripod over lengthy distances your self.
Construct high quality and design
The pinnacle of CiNX 5 is solidly constructed and I just like the design options lots. By way of design, this can be a radical change from different heads that Miler has already achieved. For me, it seems to be like a extra fashionable head.
I just like the format of the counterweight buttons and panning and tilting management. They’re straightforward to entry and function.
A key characteristic of the CiNX collection is Miller's patented 16 CB Plus expertise, which is a singular counterweighted sequential design that enables exact and quick setup.
There’s a dial on the entrance of the CiNX 5 that lets you change between the 2 completely different payload settings.
All CiNX tripod heads characteristic a fast launch facet loading platform. That is an attention-grabbing characteristic to make use of and it lets you rapidly put or take away a digicam.
The design signifies that it takes a little bit of power and energy to unlock and unlock the locking mechanism, however by saying that, you cannot have any fast launch system that’s too straightforward to take away.
What I favored, is that any ARRI appropriate digicam plate can be utilized on the CiNX collection. I attempted it with a transparent Tangerine RAR dovetail plate.
The issue I encountered (a minimum of with Brilliant mandarin plate) was that I couldn’t transfer the plate again due to the Miller locking screw. The Tangerine Brilliant plate doesn’t have a channel groove just like the included Miller plate. You may take away the locking screw, however then you’ll not have any safety mechanism.
It’s good to have the ability to flip a set screw in case you are utilizing a wider or narrower digicam plate.
The side-release platform just isn’t actually very completely different from that of a Sachtler 1910 Cine 7 + 7 HD fluid head.
The CiNX 5 that I used to be testing was additionally model new, so after all all the things shall be a bit tight and require just a little break-in.
The interchangeable base is a characteristic to not be ignored on the CiNX collection. This makes the tripod heads very versatile, as you possibly can adapt them to work with a lot of fundamental configurations of 100mm, 150mm claw ball and Mitchell mount (normal 100mm).
This characteristic is one thing you are inclined to see solely on the costlier OConnor techniques.
Ultimately, that's what actually issues to the tripod heads. If you’re going to spend some huge cash on a tripod head that you simply intend to maintain for years, you wish to know that this cash is properly spent.
The CiNX 5 is a rock-solid tripod head. It's tremendous easy and presents a powerful vary of rigidity and counterweight settings. Personally, I like numerous rigidity on the pinnacle of my tripod once I pan and tilt it. The CiNX 5 is simply nearly as good, if not higher, than every other tripod head I've used on this regard.
Even if you use very heavy lens units and cameras, the CiNX 5 by no means feels prefer it's going to instantly begin slipping or having issues . If something, it nonetheless appears to work finest with heavier masses.
I actually like you could press a button and never solely illuminate the improve bubble, but in addition see all of your rigidity and counterweight settings. It might be a small factor, however in the actual world, it makes a giant distinction.
I’m fairly used to utilizing Sachtler tripods with muscle reminiscence, so it took a short time to get used to the CiNX 5. After utilizing it for just a few days, I grew to become acquainted with its operation and I used to be capable of make adjustments. with out having to consider what I used to be doing.
After I shoot documentaries about nature or nature with a stable tripod system, it’s completely important. You want a sturdy head and a really sturdy pair of legs when taking pictures with lengthy lenses. In case you are attempting to realize weight by choosing one thing lighter and smaller, you’ll find yourself with horrible photographs.
After I movie at 1000mm and I wish to observe the motion, I want a really secure and safe platform. I discovered mixture of the tripod legs fabricated from alloy CiNX 5 and HDC 100 1 Stage with a central spreader was greater than worthwhile.
The Sachtler SpeedLevel Clamp actually missed me once I was testing the CiNX 5.
The next optionally available equipment can be found:
Articulated Pan Deal with with Extension Crimped Deal with Pliers Extension Mounting Block (AX) Mitchell Fundamental Adapter with Clamping Nut, Claw Ball Degree D150 (consists of Clamp Nut) Miller CiNX Head Field (Swimsuit, claw ball D100)
Payload Vary: 2-21kg (Four.Four-46.2lbs) Weight: Four.0kg (eight.8lbs) Counterweight Positions: 16 Selectable Positions (15 + zero) Pan Tilt Drag: 7 Selectable Fluid Drag Positions + 0Pan Tilt Locks: Constructive locking of the brake caliper locking system Vary: 90 ° / -75 ° Vary: 360 ° Digital camera platform: Aspect-release fast launch digicam (Arri sort) Sliding vary: 150 mm (5, 9 ") Mounting base: Ø100 mm (three.9") ball leveling (normal) Ø150 mm (5.9 ") ball leveling (decide.) Mitchell base (decide.) Peak above the bowl: 202mm (eight.zero ") Illuminated Controls: Bubble Degree, Pan-Tilt Path Controls Pan Deal with: 390 to 590 mm (15.Four to 23.2") Telescopic Vary Temperature Vary: -40 ° to + 65 ° C (-40 ° C) ° to + 149 ° F)
CiNX 5 Head Equipment System
In the event you want numerous versatility, Miller presents the CiNX 5 Fluid Head Equipment. The pinnacle equipment is available in a tough resin case with a customized PE45 foam waterproof shell to hold Miller Fluid CiNX heads and equipment.
So what do you get within the equipment?
Gentle fluid head for panning and tilting of the cinema and full equipment of equipment. The hull excessive efficiency resin. Arri Miller Digital camera Plate (1065). 100mm claw ball (mounted). Mitchell base adapter. Degree claw balls D150. Telescopic deal with, expandable by 200 mm (5 "). The articulated pan deal with multiposition. Clip extension with serrated deal with. Accent mounting block.
Telescopic deal with, expandable by 200 mm (5 "). Significantly appropriate for sturdy trails.
The multi-position articulated panoramic deal with is designed for filmmakers who want exact and exact panning and tilting management. Its flexibility of positioning permits tough photographs at impractical angles.
The toothed deal with extension permits pot handles to be mounted 50 mm from the fluid head.
The fundamental Mitchell adapter permits mounting the CiNX Fluid heads on normal Mitchell flat-base tripods.
D100mm Claw Ball (manufacturing unit mounted)
D150 Claw Ball Degree is an adapter designed to connect to the underside of a flat-based fluid head. Attaching the adapter then permits mounting on D150 tripods.
The mounting block permits the consumer to connect three kg of equipment, similar to an exterior viewfinder. Permits 1/Four "and three/eight" threads.
The Miller CiNX 5 is priced at $ 5,128.38, which is a aggressive worth in comparison with the competitors.
Miller CiNX 5 5 $ 128.38 USDSachtler 18 S2 Head Fluid 5 $ 386.50 USDSachtler 1910 Cine 7 + 7 Head HD Fluid $ 6,460.00 USDVinten VISION 100 Head Liquid (100mm Bullet Base) $ 6,265.25 USDOConnor Final 1040 Liquid Head $ 7,457.50 USD USD
As you possibly can see, costs differ lots. As for pricing, the CiNX 5 is absolutely compliant with the Sachtler 18 S2, however it’s far more inexpensive than a Sachtler 1910 Cine 7 + 7 HD Fluid Head or an OConnor.
The CiNX 5 Fluid head equipment prices US $ 7,793.82.
I began utilizing Miller wooden poles in 1990 and I have to admit that I’ve not used any Miller tripods for greater than 25 years.
The performances of the CiNX head 5 m have all the time stunned. Regardless of its dimension and weight, it manages to breed the efficiency of bigger and bigger heads.
It's properly executed, purposeful and simple to make use of. Personally, I believe it strikes much more than its weight.
Though I don’t suppose it's for everybody, for those who're searching for a high-performance, high-performance fluid head that can work properly for medium to massive digital cinema digicam units and enormous cinema screens, the CiNX 5 is unquestionably attention-grabbing to observe. at. This can be a compelling possibility in case you are searching for a Sachtler 1910 Cine 7 + 7 HD or OConnor 1040 / 1030Ds fluid head.